• Detail Information

Product Description

This USB camera module is one of our bestsellers, featuring day and night vision capabilities. It captures color images during the day when lighting conditions are good, and black and white images at night when lighting conditions are poor. The LED lights automatically turn off during the day and turn on at night, requiring no manual intervention.

The Wifi IP Camera Module has a 2MP resolution (1920x1080) and uses the Omnivision OV2710 CMOS sensor. This sensor provides low-light sensitivity of 3700mV/lux-sec, an S/N ratio of 40 dB, and a peak dynamic range of 69 dB. As a result, the camera can operate in almost any lighting condition, from bright daylight to near-complete darkness below 15 lux.

Key Features

1. Full HD Video at 30fps in MJPG Mode
Supports 1920 × 1080 MJPG output at up to 30fps. The supplied specification also lists 1280 × 720, 640 × 480 and 320 × 240 MJPG modes at 30fps.

2. 170° Diagonal Field of View
The specified 170° ±3° diagonal view captures a broad area from a single camera position, supporting wide-area observation within the device’s installation environment.

3. F1.6 Fixed-Focus Lens
A 2.3mm lens with an F1.6 aperture provides the specified optical configuration. The listed focus range starts at 60cm, making it suitable for subjects beyond close-up distances.

4. USB 2.0 Connection
Uses a 5-pin, 1.25mm-pitch board connector for the USB cable assembly, with a specified 5V ±5% power supply.

5. MJPG and YUY2 Output
Provides compressed MJPG and uncompressed YUY2 output options. YUY2 frame rates should be confirmed separately for each resolution.

6. Adjustable Image Settings
Exposure, brightness, contrast and saturation can be adjusted through supported firmware and host software to suit the scene.

7. M12 Lens Mount
The M12 × 0.5 mount provides a basis for evaluating alternative lens configurations when different coverage or working distances are required.

Specification

Application Areas

Face Recognition: Face capture for access control.
QR Code Payment: Code imaging for decoding.
VR Devices: Visual input for motion tracking.
High-Speed Tracking: Moving-object image capture.
Terminal Scanning: Document and barcode imaging.
Robot Vision: Images for positioning and guidance.
Security & Smart Home: Indoor and outdoor monitoring.
AI Training Data Collection: Image capture for AI datasets.
Medical & Life Science Imaging: Image capture for microscopy and research.

OEM/ODM Customization & Development Process

Match the Camera to Your Integration Requirements

A suitable camera configuration must fit both the imaging task and the device structure. Sinoseen provides OEM/ODM camera module services and can assess changes to the optical setup, flexible-circuit layout, connection arrangement, and supported operating configuration.

Customization feasibility, development scope, cost, and lead time are confirmed after engineering review.

Customization Process

Step 1 — Share Your Requirements

Provide the application, host platform, required resolution and frame rate, working distance, installation space, and estimated quantity.

Step 2 — Review the Configuration

Assess the sensor operating mode, interface, lens, and mechanical arrangement. Identify any changes required for the target device.

Step 3 — Confirm Drawings and Evaluation Criteria

Agree on the configuration, connection details, mechanical revision, and sample acceptance requirements before prototype production.

Step 4 — Evaluate Samples

Test image quality, sustained frame rate, exposure behavior, host integration, and mechanical fit in the actual operating environment.

Step 5 — Approve the Production Configuration

Confirm the accepted sample, drawings, optical components, and operating configuration before proceeding with volume production.

Send Your Drawings and Imaging Requirements

About Sinoseen

Shenzhen Sinoseen Technology Co., Ltd. was established in June 2016 and specializes in CMOS camera module design, development, manufacturing, and OEM/ODM services.

Its product portfolio includes USB, MIPI, and DVP camera modules, with services extending from development through manufacturing and after-sales support.

For embedded vision projects, Sinoseen works with customers to assess the imaging task alongside mechanical and electrical integration requirements. This helps define a camera configuration that can be evaluated in the intended device before production approval.

Certifications & Intellectual Property

Sinoseen’s documentation includes quality management records, product compliance documents, software copyrights, and utility model patents. For your camera module project, please request the current documents applicable to the selected model and configuration, including relevant CE, FCC, or RoHS documentation.

Shenzhen Sinoseen Technology Co., LTD

China top 10 camera module manufacturer

If you are struggling to find the right camera module solution, please contact us, we will customize all kinds of USB/MIPI/DVP interface camera modules according to your needs, and have a dedicated team to provide you with the most suitable solution.

FAQ:

Q1. How to choose the right camera module?

A: Please tell us your specific needs, such as application scenarios, resolution, size, and lens requirements. We will have a professional team of engineers to assist you in choosing the most suitable camera module.

Q2. How to start proofing?

A: After confirming all the parameters, we will draw a drawing to confirm the details with you. Once the drawing is confirmed, we will arrange a proofing.

Q3: How do I send the payment?

A: Currently we accept T/T bank transfer and Paypal.

Q4: How long does it take to make a sample?

A: If it is a USB camera module, it usually takes 2-3weeks, if it is a MIPI or DVP camera module, it usually takes 10-15days.

Q5: How long will it take to receive the sample after it is ready?

A: After the samples have been tested and there is no problem, we will send the samples to you via DHL FedEx UPS or any other courier methods, usually within a week.